New Released Braindump2go Microsoft 70-412 Dumps PDF – Questions and Answers Updated with Microsoft Official Exam Center! Visit Braindump2go and download our 70-412 Exam Questions Now, Pass 70-412 100% at your first time!
Vendor: Microsoft
Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 R2 Services
![1[10]](http://www.itexamquiz.com/braindump2go/bdimages/fbff9ea0d3e1_7FEE/110.png "1[10]")
QUESTION 136
You are employed as a network administrator at ABC.com.
ABC.com has an Active Directory domain named ABC.com.
All servers on the ABC.com network have Windows Server 2012 R2 installed.
You have been instructed to configure a custom Windows Recovery Environmen(Windows RE) image that should allow for a drive is mapped automatically to a network share in the event that a server is started using the image.
Which of the following actions should you take?
A. You should consider configuring the startnet.cmd in the image
B. You should consider configuring the startup.exe command included in the image.
C. You should consider configuring the ntdsutil command included in the image
D. You should consider configuring the certutil.exe command included in the image
Answer: A
QUESTION 137
You are employed as a senior network administrator at ABC.com.
ABC.com has an Active Directory domain named ABC.com.
All servers on the ABC.com network have Windows Server 2012 R2 installed.
You are currently running a training exercise for junior network administrators.
You are discussing the endpoint types supported by Active Directory Federation Services(AD FS) Which of the following are supported types?(Choose all that apply)
A. SAML WebSSO
B. Anonymous
C. WS-Federation Passive
D. Client Certicate
E. WS-Trust
Answer: ACE
Explanation:
http://technet.microsoft.com/en-us/library/adfs2-help-endpoints(v=ws.10).aspx
QUESTION 138
You are employed as a senior network administrator at ABC.com.
ABC.com has an Active Directory domain named ABC.com.
All servers on the ABC.com network have Windows Server 2012 R2 installed.
The ABC.com domain has an Active Directory site configured in London,and an Active Directory site in New york.
You have been instructed to make sure that the synchronization of account lockout data happens quicker.
A. You should consider editing the options attribute from WANLINK properties
B. You should consider editing the options attribute from LANLIK properties
C. You should consider editing the options attribute from the DEFAULTSITELINK properties
D. You should consider editing the proxyAddressess attribute from the DEFAULTIPSITELINK properties.
Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/cc961787.aspx
QUESTION 139
You are employed as a senior network administrator at ABC.com.
ABC.com has an Active Directory domain named ABC.com.
All servers on the ABC.com network have Windows Server 2012 R2 installed.
ABC.com has two servers,named SERVER1 and SERVER2 which are configured in a two-node failover cluster. Server1 includes a folder,named ABCAppData,which is configured as a Distributed File System (DFS) name space folder target. After configuring another two nodes in the failover cluster, you are instructed to make sure that access to ABC AppData is highly available.
You also have to make sure that application data is replicated to ABCAppData via DFS replication.
Which following actions should you take ?
A. You should consider configuring a scale-out File Server
B. You should consider configuring the replication settings for the cluster
C. You should consider configuring a file server for general use
D. You should consider configuring the Quorum settings
Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/hh831349.aspx
QUESTION 140
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.
Which IPV6 scope prefix should you use?
A. FF00::
B. 2001::
C. FD00:123:4567::
D. FE80::
Answer: C
Explanation:
Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:
* They are not allocated by an address registry and may be used in networks by anyone without outside involvement.
* They are not guaranteed to be globally unique.
* Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be
delegated in the global DNS.
As fd00::/8 ULAs are not meant to be routed outside their administrative domain (site or
organization), administrators of interconnecting networks normally do not need to worry about the uniqueness of ULA prefixes.
QUESTION 141
Your network contains an Active Directory forest named contoso.com.
The forest contains a single domain. The domain contains three domain controllers.
The domain controllers are configured as shown in the following table.
You discover that when you run Group Policy Results from Group Policy Management, the settings from site-linked Group Policy objects (GPOs) fail to appear in the results.
You need to ensure that the settings from site-linked GPOs appear in the results.
What should you do first?
A. Run adprep on DC3 by using Windows Server 2012 R2 installation media.
B. Transfer the infrastructure master role to DC3.
C. Upgrade DC2 to Windows Server 2012 R2.
D. Run adprep on DC1 by using Windows Server 2003 installation media.
Answer: A
Explanation:
In this scenario a Windows 2012 server has been added to a Windows 2003 network.
Note:
* Before adding your new Windows 2012 Domain Controller, or attempting to perform an inplace upgrade of an existing Windows 2008 or 2008 R2 DC, you must make sure that the Schema is upgraded to support your new Windows 2012 DC, and that you prepare each domain where you plan to install Windows 2012 DCs. To do this we can use the ADPREP.exe tool found in the support\adprep folder on your installation media.
* Starting with Windows 2012 there is only one version of ADPREP available, and that is a 64-bit version.
* Adprep is the utility–included in the OS installation media–that performs several crucial functions to upgrade AD to support that OS. The utility has three major options: /forestprep, /domainprep, and /rodcprep. The /forestprep option runs first, extending the AD schema with new object and attribute classes that the new AD version needs. The /domainprep option creates new well-known objects in AD, App1ies security changes, and miscellaneous other bits. Finally, /rodcprep makes forest-wide security changes to allow read-only domain controller (RODC) functionality. The Windows Server 2012 R2 version of adprep.exe can run on any server that runs a 64- bit version of Windows Server 2008 or later.
http://technet.microsoft.com/en-us/library/bb726995.aspx
http://www.ipuptime.net/Multicast.aspx
http://technet.microsoft.com/en-us/library/gg144561(v=exchg.141).aspx
http://en.wikipedia.org/wiki/Unique_local_address
QUESTION 142
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 is configured to use a DNS server from an Internet Service Provider (ISP) as a forwarder. Corporate management requires that client computers only resolve names of
contoso.com computers.
You need to configure Server1 to resolve names in the contoso.com zone only.
What should you do on Server1?
A. From DNS Manager, modify the root hints of Server1.
B. From Windows PowerShell, run the Remove-DnsServerForwarder cmdlet.
C. From Windows PowerShell, run the Set-NetDnsTransitionConfiguration cmdlet.
D. From DNS Manager, modify the Advanced properties of Server1.
Answer: A
Explanation:
If the DNS server does not know the address of the requested site, then it will forward the request to another DNS server. In order to do so, the DNS server must know of the IP address of another DNS server that it can forward the request to. This is the job of root hints. Root hints provides a list of IP addresses of DNS servers that are considered to be authoritative at the root level of the DNS hierarchy(also known as root name server).
http://technet.microsoft.com/en-us/library/ee649221(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/jj649867.aspx
http://technet.microsoft.com/en-us/library/jj613703.aspx
QUESTION 143
You have a server named Server1 that runs Windows Server 2012 R2.
Each day, Server1 is backed up fully to an external disk.
On Server1, the disk that contains the operating system fails.
You replace the failed disk.
You need to perform a bare-metal recovery of Server1 by using the Windows Recovery
Environment (Windows RE).
What should you use?
A. The Wbadmin.exe command
B. The Repair-bde.exe command
C. The Get-WBBareMetalRecovery cmdlet
D. The Start-WBVolumeRecovery cmdlet
Answer: A
Explanation:
A. Enables you to back up and restore your operating system, volumes, files, folders, and
applications from a command prompt.
B. Accesses encrypted data on a severely damaged hard disk if the drive was encrypted by using BitLocker. Repair-bde can reconstruct critical parts of the drive and salvage recoverable data as long as a valid recovery password or recovery key is used to decrypt the data.
C. Gets the value that indicates whether the ability to perform bare metal recoveries from backups has been added to the backup policy (WBPolicy object).
D. Starts a volume recovery operation.
QUESTION 144
You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. Server1 has a volume named D that contains user data. Server1 has a volume named E that is empty. Server1 is configured to create a shadow copy of volume D every hour.
You need to configure the shadow copies of volume D to be stored on volume E.
What should you run?
A. The Set-Volume cmdlet with the -driveletter parameter
B. The Set-Volume cmdlet with the -path parameter
C. The vssadmin.exe add shadowstorage command
D. The vssadmin.exe create shadow command
Answer: C
Explanation:
A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a letter used to identify a drive or volume in the system.
B. Sets or changes the file system label of an existing volume -Path Contains valid path information. C. Displays current volume shadow copy backups and all installed shadow copy writers and providers. AddShadowStroage Adds a shadow copy storage association for a specified volume.
D. Displays current volume shadow copy backups and all installed shadow copy writers and providers. Shadow Creates a new shadow copy of a specified volume.
http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx
QUESTION 145
Your network contains an Active Directory forest named contoso.com.
All servers run Windows Server 2012 R2.
The domain contains four servers.
The servers are configured as shown in the following table.
You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. On which server should you install IPAM?
A. DC1
B. DC2
C. DC3
D. Server1
Answer: D
Explanation:
D. IPAM cannot be installed on Domain Controllers. All other servers have the DC role
http://technet.microsoft.com/en-us/library/hh831353.aspx
QUESTION 146
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 is backed up by using Windows Server Backup.
The backup configuration is shown in the exhibit.
You discover that only the last copy of the backup is maintained.
You need to ensure that multiple backup copies are maintained.
What should you do?
A. Modify the backup destination.
B. Configure the Optimize Backup Performance settings.
C. Modify the Volume Shadow Copy Service (VSS) settings.
D. Modify the backup times.
Answer: A
Explanation:
A, The destination in the exhibit shows a network share is used.
If a network share is being used only the latest copy will be saved
http://windows.microsoft.com/en-us/windows7/where-should-i-save-my-backup
QUESTION 147
You have a server named Server1 that runs Windows Server 2012 R2. Server1 is located in the perimeter network and has the DNS Server server role installed. Server1 has a zone named contoso.com.
You apply a security template to Server1. After you apply the template, users report that they can no longer resolve names from contoso.com. On Server1, you open DNS Manager as shown in the DNS exhibit. (Click the Exhibit button.)
On Server1, you open Windows Firewall with Advanced Security as shown in the Firewall exhibit. (Click the Exhibit button.)
You need to ensure that users can resolve contoso.com names.
What should you do?
A. From Windows Firewall with Advanced Security, disable the DNS (TCP, Incoming) rule and the
DNS (UDP, Incoming) rule.
B. From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.
C. From DNS Manager, unsign the contoso.com zone.
D. From DNS Manager, modify the Start of Authority (SOA) of the contoso.com zone.
E. From Windows Firewall with Advanced Security, modify the profiles of the DNS (TCP, Incoming) rule
and the DNS (UDP, Incoming) rule.
Answer: E
QUESTION 148
Your network contains an Active Directory domain named corp.contoso.com.
You deploy Active Directory Rights Management Services (AD RMS).
You have a rights policy template named Template1. Revocation is disabled for the template.
A user named User1 can open content that is protected by Template1 while the user is connected to the corporate network. When User1 is disconnected from the corporate network, the user cannot open the protected content even
if the user previously opened the content.
You need to ensure that the content protected by Template1 can be opened by users who are disconnected from the corporate network.
What should you modify?
A. The User Rights settings of Template1
B. The templates file location of the AD RMS cluster
C. The Extended Policy settings of Template1
D. The exclusion policies of the AD RMS cluster
Answer: C
Explanation:
You can add trust policies so that AD RMS can process licensing requests for content that was rights protected
http://technet.microsoft.com/en-us/library/ee221071(v=ws.10).aspx
QUESTION 149
Your company recently deployed a new Active Directory forest named contoso.com.
The forest contains two Active Directory sites named Site1 and Site2.
The first domain controller in the forest runs Windows Server 2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?
A. Active Directory Sites and Services
B. DFS Management
C. Repadmin
D. Dfsrdiag
Answer: D
Explanation:
In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force replication immediately by using DFS Management, as described in Edit Replication Schedules. You can also force replication by using the Dfsrdiag SyncNow command.
You can force polling by using the Dfsrdiag PollAD command.
http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072
QUESTION 150
You have 30 servers that run Windows Server 2012 R2.
All of the servers are backed up daily by using Windows Azure Online Backup.
You need to perform an immediate backup of all the servers to Windows Azure Online Backup. Which Windows PowerShell cmdlets should you run on each server?
A. Get-OBPolicy | StartOBBackup
B. Start-OBRegistration | StartOBBackup
C. Get-WBPolicy | Start-WBBackup
D. Get-WBBackupTarget | Start-WBBackup
Answer: A
Explanation:
A. starts a backup job using a policy
B. Registers the current computer to Windows Azure Backup.
C. Not using Azure
D. Not using Azure
http://technet.microsoft.com/en-us/library/hh770406(v=wps.620).aspx
http://technet.microsoft.com/en-us/library/hh770426.aspx
http://technet.microsoft.com/en-us/library/hh770398.aspx
Braindump2go 70-412 Latest Updaed Braindumps Including All New Added 70-412 Exam Questions from Exam Center which Guarantees You Can 100% Success 70-412 Exam in Your First Try Exam!