Braindump2go New Released Microsoft 70-412 Practice Tests Sample Questions Free Download! 100% Same Questions with Actual 70-412 Exam! Guaranteed 100% Pass!
Vendor: Microsoft
Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 R2 Services
![1[10]](http://www.itexamquiz.com/braindump2go/bdimages/fbff9ea0d3e1_7FEE/110.png "1[10]")
QUESTION 76
You have a test server named Server1 that is configured to dual-boot between Windows Server 2008 R2 and Windows Server 2012 R2.
You start Server1 and you discover that the boot entry for Windows Server 2008 R2 no longer appears on the boot menu.
You start Windows Server 2012 R2 on Server1 and you discover the disk configurations shown in the following table.
You need to restore the Windows Server 2008 R2 boot entry on Server1.
What should you do?
A. Run bootrec.exe and specify the /scanos parameter.
B. Run bcdedit.exe and specify the /create store parameter.
C. Run bootcfg.exe and specify the /copy parameter.
D. Run bootrec.exe and specify the /rebuildbcd parameter.
Answer: D
QUESTION 77
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has access to disks that connect to a RAID controller, iSCSI disks, and disks connected to a SCSI controller.
You plan to use a tiered storage space on Server1.
You need to identify which storage controller and volume type you must use for the tiered storage space.
Which storage components should you use? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 78
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers.
The domain controllers are configured as shown in the following table.
An IP site link exits between each site.
You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB.
You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable.
What should you do?
A. Create a site link bridge.
B. Create additional connection objects for DC3 and DC4.
C. Create additional connection objects for DC1 and DC2.
D. Increase the cost of the site link between SiteA and SiteC.
Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/dd277430.aspx#XSLTsection126121120120
QUESTION 79
You have a file server named Server1 that runs Windows Server 2012 R2.
The folders on Server1 are configured as shown in the following table.
A new corporate policy states that backups must use Windows Azure Online Backup whenever possible.
You need to identify which technology you must use to back up Server1.
he solution must use Windows Azure Online Backup whenever possible.
What should you identify? To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/hh831761.aspx
QUESTION 80
You have a server named File1 that runs Windows Server 2012 R2. File1 has the File Server role service installed.
You plan to back up all shared folders by using Windows Azure Online Backup.
You download and install the Windows Azure Online Backup Service Agent on File1.
You need to ensure that you use Windows Server Backup to back up data to Windows Azure Online Backup.
What should you do?
A. From Computer Management, add the File1 computer account to the Backup Operators group.
B. From the Services console, modify the Log On settings of the Windows Azure Online Backup
Service Agent.
C. From Windows Server Backup, run the Register Server Wizard.
D. From a command prompt, run wbadmin.exe enable backup.
Answer: C
Explanation:
http://blogs.technet.com/b/windowsserver/archive/2012/03/28/microsoft-online-backupservice.aspx
QUESTION 81
Your network contains three servers named HV1, HV2, and Server1 that run Windows Server 2012 R2. HV1 and HV2 have the Hyper-V server role installed.
Server1 is a file server that contains 3 TB of free disk space.
HV1 hosts a virtual machine named VM1. The virtual machine configuration file for VM1 is stored in D:\VM and the virtual hard disk file is stored in E:\VHD.
You plan to replace drive E with a larger volume.
You need to ensure that VM1 remains available from HV1 while drive E is being replaced.
You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Perform a live migration to HV2.
B. Add HV1 and HV2 as nodes in a failover cluster. Perform a storage migration to HV2.
C. Add HV1 and HV2 as nodes in a failover cluster. Perform a live migration to HV2.
D. Perform a storage migration to Server1.
Answer: D
Explanation:
‘Using a minimum amount of adminitrative effort’ is the always key for this type of questions.
They will give multiple possible solutions, but with that key in mind, D is the answer.
A,C is not the answer because VM1 has to remain in HV1
B is possible, but it takes lots of effort to set up cluster.
D seems the best answer. You just do storage migration lively to another server, then bring back when large disk is insert to hot swap bay.
QUESTION 82
Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
DC1 hosts an Active Directory-integrated zone for contoso.com.
You add the DNS Server server role to DC2.
You discover that the contoso.com DNS zone fails to replicate to DC2.
You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.
You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.
Which tool should you use?
A. Ntdsutil
B. Repadmin
C. Dnslint
D. Active Directory Domains and Trusts
Answer: B
Explanation:
If you see question about AD Replication, First preference is AD sites and services, then
Repadmin and then DNSLINT.
QUESTION 83
You have a server named Server1 that runs Windows Server 2012 R2.
Windows Server 2012 R2 is installed on volume C.
You need to ensure that Safe Mode with Networking loads the next time Server1 restarts.
Which tool should you use?
A. The Msconfig command
B. The Restart-Server cmdlet
C. The Restart-Computer cmdlet
D. The Bootcfg command
Answer: A
Explanation:
A. Use system config to configure boot options
B. Not a valid cmdlet
C. Restarts (“reboots”) the operating system on local and remote computers. No boot options
D. modifies the Boot.ini file no option for safe mode/networking for win8/2012
http://technet.microsoft.com/en-us/library/hh849837.aspx
http://support.microsoft.com/kb/317521
http://technet.microsoft.com/en-us/library/cc725967.aspx
QUESTION 84
You have a file server named FS1 that runs Windows Server 8.
Data Deduplication is enabled on FS1.
You need to configure Data Deduplication to run at a normal priority from 20:00 to 06:00 daily. What should you configure?
A. File and Storage Services in Server Manager
B. The Data Deduplication process in Task Manager
C. Disk Management in Computer Management
D. The properties of drive C
Answer: A
Explanation:
A. In Windows Server 2012 R2, deduplication can be enabled locally or remotely by using Windows PowerShell or Server Manager.
http://technet.microsoft.com/en-us/library/hh831700.aspx
QUESTION 85
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
All client computers run Windows 8 Enterprise.
You have a remote site that only contains client computers.
All of the client computer accounts are located in an organizational unit (CU) named Remote1.
A Group Policy object (GPO) named GPO1 is linked to the Remote1 CU.
You need to configure BranchCache for the remote site.
Which two settings should you configure in GPO1? To answer, select the two appropriate settings in the answer area.
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/dd637820(v=ws.10).aspx
QUESTION 86
Hotspot Question
Your company has a main office and a branch office. An Active Directory site exists for each office. The network contains an Active Directory forest named contoso.com.
The contoso.com domain contains three member servers named Server1, Server2, and Server3.
All servers run Windows Server 2012 R2.
In the main office, you configure Server1 as a file server that uses BranchCache.
In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.
You are creating a Group Policy for the branch office site. In the branch office, you need to configure the client computers that run Windows B to use Server2 and Server3 as BranchCache.
Answer:
Explanation:
http://technet.microsoft.com/en-us/library/ee649153(v=ws.10).aspx
http://blogs.technet.com/b/wsnetdoc/archive/2012/06/01/highlighting-branchcache-hosted-cache-mode-in-windows-server-2012.aspx
QUESTION 87
Your network contains two Active Directory forests named contoso.com and fabrikam.com.
A two- way forest trust exists between the forests.
The contoso.com forest contains an enterprise certification authority (CA) named CAl.
You implement cross-forest certificate enrollment between the contoso.com forest and the fabrikam.com forest. On CA1, you create a new certificate template named Template1.
You need to ensure that users in the fabrikam.com forest can request certificates that are based on Template1.
Which tool should you use?
A. Sync-ADObject
B. Pkiview.msc
C. CertificateServices.ps1
D. Certutil
E. PKISync.ps1
Answer: E
Explanation:
A. Replicates a single object between any two domain controllers that have partitions in common. B. Monitoring and troubleshooting the health of all certification authorities (CAs) in a public key infrastructure (PKI) are essential administrative tasks facilitated by the Enterprise PKI snap-in.
D. use Certutil.exe to dump and display certification authority (CA) configuration information, configure Certificate Services, backup and restore CA components, and verify certificates, key pairs, and certificate chains.
E. PKISync.ps1 copies objects in the source forest to the target forest
http://technet.microsoft.com/en-us/library/hh852296.aspx
http://technet.microsoft.com/en-us/library/cc732261(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/ff955845(v=ws.10).aspx
QUESTION 88
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains an enterprise certification authority (CA).
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You install the Active Directory Federation Services server role on Server1.
You plan to configure Server1 as an Active Directory Federation Services (AD FS) server.
The Federation Service name will be set to adfs1.contoso.com.
You need to identify which type of certificate template you must use to request a certificate for AD FS.
Answer:
Explanation:
http://blogs.msdn.com/b/alextch/archive/2011/06/27/installing-a-stand-along-adfs-service.aspx
QUESTION 89
Your network contains an Active Directory domain named contoso.com.
The domain contains an IP Address Management (IPAM) server that uses a Windows Internal Database.
You install a Microsoft SQL Server 2012 instance on a new server.
You need to migrate the IPAM database to the SQL Server instance.
Which cmdlet should you run?
A. Disable-IpamCapability
B. Set-IpamConfiguration
C. Update-IpamServer
D. Move-IpamDatabase
Answer: D
QUESTION 90
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA).
You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes:
– Email security
– Client authentication
– Encrypting File System (EFS)
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From a Group Policy, configure the Certificate Services Client – Auto-Enrollment settings.
B. From a Group Policy, configure the Certificate Services Client – Certificate Enrollment Policy settings.
C. Modify the properties of the User certificate template, and then publish the template.
D. Duplicate the User certificate template, and then publish the template.
E. From a Group Policy, configure the Automatic Certificate Request Settings settings.
Answer: AD
Explanation:
The default user template supports all of the requirements EXCEPT auto enroll as shown below:
However a duplicated template from users has the ability to autoenroll:
The Automatic Certificate Request Settings GPO setting is only available to Computer, not user.
http://technet.microsoft.com/en-us/library/dd851772.aspx
Braindump2go New Published Exam Dumps: Microsoft 70-412 Practice Tests Questions, 346 Latest Questions and Answers from Official Exam Centre Guarantee You a 100% Pass! Free Download Instantly!