December/2019 Braindump2go 300-101 Dumps with PDF and VCE New Updated Today! Following are some new 300-101 Exam Questions,
New Question
What are two limitations when in use of NPTv6 for IPV6 vs IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaces NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations
Answer: CE
New Question
Which two statements about NTP stratum are true? (Choose two )
A. Stratum 15 indicates a device that is not synchronized
B. Stratum 1 devices receive their time from a peer that is connected directly to an authoritative time source.
C. The highest stratum level a synchronized device can have is 16.
D. Stratum 2 devices receive their time from a peer that is connected directly to an authoritative time source
E. Stratum 0 devices are connected directly to an authoritative time source
F. Stratum 1 devices are connected directly to an authoritative time source
Answer: DF
New Question
What is the result of the command ip flow-export destination 10.10.10.1 5858?
A. It configures the router to export cache flow information to IP 10.10.10.1 on port UDP/5858.
B. It configures the router to export cache flow information about flows with destination IP 10.10.10.1 and port UDP/5858.
C. It configures the router to receive cache flow information from IP 10.10.10.1 on port UDP/5858.
D. It configures the router to receive cache flow information about flows with destination IP 10.10.10.1 and port UDP/5858.
Answer: A
New Question
Which two options can you use to configure an EIGRP stub router? (Choose two)
A. summary-only
B. receive-only
C. external
D. summary
E. totally-stubby
F. not-so-stubby
Answer: BD
Explanation:
https://www.cisco.com/en/US/technologies/tk648/tk365/technologies_white_paper0900aec d8023df6f.html
eigrp stub [ [receive-only] || [connected] [static] [summary] [redistributed] ] The following options are available:
?Receive-only: router only accepts, but does not explicitly advertise, any routes. This option may not be used in combination with any other options. ?Connected: router advertises directly-connected networks ?Static: router advertises any configured static routes ?Summary: router advertises any configured summarized routes ?Redistributed: router advertises any routes learned from another protocol, such as OSPF The eigrp stub configuration need only be entered on the spoke routers. The hub routers determine that they are talking to a stub router by examining the TLV in the HELLO packet.
New Question
Which technology is required on an EVN trunk interface?
A. 802.1q
B. NAT
C. VRF-Lite
D. IS-IS
Answer: A
New Question
Refer to Exhibit. A network engineer is unable to make VRF lite EIGRP adjacency work.
There is nothing wrong with communication between R1 and R2.
What command will eliminate the issue when executed on both routers?
A. (config-router-af)#autonomous-system 100
B. (config)#ip-multicast-routing
C. (config-vrf)#route-target both 100:1
D. config-router-af)#network 209.165.202.128.0.0.0.31
Answer: A
New Question
Refer to the exhibit. You have correctly identified the inside and outside interfaces in the NAT configuration of this device. Which effect of this configuration is true?
A. dynamic NAT
B. static NAT
C. PAT
D. NAT64
Answer: C
New Question
Which condition can cause unicast reverse path forwarding to fail?
A. split horizon
B. STP convergence
C. PortFast security violation
D. asymmetric routing
Answer: D
New Question
Refer to the following:
Logging Console7
Which option is one of the effects entering this command on a Cisco IOS router, with no additional logging configuration?
A. Debug messages can be seen on the console by enabling “terminal monitor.”
B. Debug messages are logged only on active console connections.
C. A user that is connected via SSH sees level 7 messages
D. The router can experience high CPU utilization
Answer: B
New Question
Which two tasks does a DHCP relay agent perform? (Choose two.)
A. It forwards DHCPHELLO and DHCPREQUEST messages to the DHCP server
B. It forwards DHCPREQUEST and DHCPACK messages to the DHCP server.
C. It forwards DHCPOFFER and DHCPCOMPLETE messages to the DHCP client.
D. It forwards DHCPDISCOVER and DHCPREQUEST messages to the DHCP server.
E. t forwards DHCPOFFER and DHCPACK messages to the DHCP client.
Answer: DE
New Question
You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed.
Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication chap
C. ppp authentication ms-chap-v2
D. ppp authentication ms-chap-v2 callin
E. ppp authentication ms-chap callin
Answer: C
New Question
When a packet is denied by an IPv6 traffic filter, which additional action does the device perform?
A. It scans the rest of the ACL for a permit entry matching the destination
B. It generates a TCP Fin bit and sends it to the source.
C. A creates a null route for the destination and adds it to the route table
D. It generates an ICMP unreachable message for the frame.
Answer: D
New Question
Which two commands must you configure in the calling router to support the PPPoE client? (Choose two)
A. peer default ip address pool
B. bba-group pppoe
C. pppoe-client-dial-pool-number
D. mtu
E. pppoe enable group
Answer: CD
New Question
What is the default maximum segment size for TCP traffic?
A. 536
B. 1492
C. 1500
D. 1508
E. 3340
F. 4096
Answer: A
New Question
Which two statements about Frame Relay LMI autosense are true on a Router? (Choose two)
A. It requires the LMI type to be explicitly configured.
B. It operates on Frame Relay DTE interfaces.
C. It operates on Frame Relay DCE interfaces.
D. It operates when the line is up by the line protocol is down.
E. It requires the line protocol to be up.
Answer: BD
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/wan/configuration/guide/fwan_c/wcffrely.html
New Question
Which Cisco Express Forwarding table or tables hold forwarding information?
A. FIB table only
B. adjacency tables only
C. FIB and adjacency tables only
D. FIB,RIB, and adjacency tables
Answer: C
1.|2019 Latest Braindump2go 300-101 Exam Dumps (VCE & PDF) Instant Download:
https://www.braindump2go.com/300-101.html
2.|2019 Latest Braindump2go 300-101 Exam Questions & Answers Instant Download:
https://drive.google.com/drive/folders/0B75b5xYLjSSNUlpIeEc2YV9vRDg?usp=sharing