MICROSOFT NEWS: 70-662 Exam Questions has been Updated Today! Get Latest 70-662 VCE and 70-662 PDF Instantly! Welcome to Download the Newest Braindump2go 70-662 VCE&70-662 PDF Dumps: http://www.braindump2go.com/70-662.html (507 Q&As)
Braindump2go New Released 70-662 Microsoft Exam Dumps Free Download Today! All 507q 70-662 Exam Questions are the new updated from Microsoft Official Exam Center.Braindump2go Offers 70-662 PDF Dumps and 70-662 VCE Dumps for free Download Now! 100% pass 70-662 Certification Exam!
Exam Code: 70-662
Exam Name TS: Microsoft Exchange Server 2010, Configuring
Certification Provider: Microsoft
Corresponding Certifications: MCITP, MCITP: Enterprise Messaging Administrator on Exchange 2010, MCTS, MCTS: Microsoft Exchange Server 2010, Configuring
70-662 Dumps,70-662 PDF,70-662 PDF eBook,70-662 Braindump,70-662 Study Guide,70-662 Book,70-662 Practice Test,70-662 Dumps PDF,70-662 VCE,70-662 VCE Dumps,70-662 Valid Dumps,70-662 Exam Questions Free,70-662 Dumps,70-662 Free Dumps,70-662 Questions and Answers Free,70-662 Braindump PDF,70-662 Braindump VCE,70-662 Preparation
QUESTION 291
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.
All servers are configured to use an internal DNS server named DNS1 for host name resolution. You configure an Edge Subscription from Server1 to Server2.
You need to modify the shadow redundancy settings of Server1.
What should you do?
A. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
B. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
C. From the Exchange Management Console (EMC), modify the properties of the remote
domain.
D. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
E. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
F. From the Exchange Management Console (EMC), modify the properties of the accepted
domain.
G. From the Exchange Management Console (EMC), create a transport rule.
H. From the Exchange Management Console (EMC), disable the IP Block List feature.
Answer: A
QUESTION 292
Your company has three departments named Sales, Marketing, and Finance.
The network contains an Active Directory domain named contoso.com.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains the servers configured as shown in the following table:
– You create an Edge Subscription for Server2.
– You need to ensure that all email messages sent by users in the Sales department include a disclaimer.
What should you create?
A. a new Send connector
B. an Edge Transport rule
C. a new Edge Subscription
D. a remote domain
E. a new journal rule
F. a new federation trust
G. an attachment filter entry
H. a new organization relationship
I. a new Receive connector
J. a Hub Transport rule
K. an IP Block List Provider
L. an accepted domain
Answer: J
QUESTION 293
Your company has three departments named Sales, Marketing, and Finance.
The network contains an Active Directory domain named contoso.com.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains the servers configured as shown in the following table.
You create an Edge Subscription for Server2.
Your company merges with another company named Fabrikam, Inc.
You need to ensure that your Exchange organization can receive email for fabrikam.com.
What should you create?
A. a new organization relationship
B. a new Send connector
C. a new Receive connector
D. an accepted-domain
E. a remote domain
F. a Hub Transport rule
G. a new journal rule
H. a new Edge Subscription
I. an IP Block List Provider
J. a new federation trust
K. an Edge Transport rule
L. an attachment filter entry
Answer: D
QUESTION 294
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
All users access their mailbox by using Microsoft Outlook 2010.
The Department attribute of each user is specified in Active Directory.
You need to ensure that when the users work offline, they can locate a recipient based on the recipient’s department.
What should you do from the Exchange Management Console (EMC)?
A. Modify the default offline address book (OAB) settings.
Modify the mailbox settings of each mailbox.
B. Create an address list for each department.
Modify the mailbox settings of each mailbox.
C. Create an offline address book (OAB) for each department.
Modify the mailbox settings of each mailbox.
D. Create an address list for each department.
Modify the default offline address book (OAB) settings.
Answer: D
QUESTION 295
Drag and Drop Question
Your network contains art Active Directory forest named contoso.com.
The forest contains an Exchange Server 2010 Service Pack 1 (SP1) organization.
You have an internal network and a perimeter network.
The network contains the servers configured as shown in the following table.
You need to configure the firewall that separates the internal network and the perimeter network. The configuration must meet the following requirements:
– Ensure that inbound email messages can be relayed to Server1.
– Ensure that outbound email messages can be relayed to Server3.
– Ensure that the list of Exchange recipients is replicated to Server3.
Which TCP ports should you open on the firewall? To answer, drag the appropriate port number to the correct location in the answer area.
Answer:
Explanation:
Answer-Port 25 needs to be going both ways-then port 50636 is used for LDAP Port 25 needs to be going both ways for sending and receiving mail over SMTP. Then port 50636 is used for the LDAP connection necessary to transfer the list of Exchange recipients to Server3.
QUESTION 296
Your network contains an Active Directory domain named fabrikam.com.
The domain contains an Exchange Server 2010 Service Pack 1 (SP1) organization.
You add a child domain named europe.fabrikam.com.
All domain controllers run Windows Server 2008 R2 Service Pack 1 (SP1).
You run the dsadd.exe command to create 2,000 users accounts in europe.fabrikam.com.
You need to ensure that you can create a mailbox for each user account in europe.fabrikam.com. What should you do?
A. From the Exchange Server 2010 installation media, run setup /preparedomain.
B. Add the domain controllers from europe.fabnkam.com to the Delegated Setup group.
C. Add the domain controllers from europe.fabrikam.com to the Exchange Trusted Subsystem
group.
D. From the Exchange Server 2010 installation media, run setup /prepareschema.
Answer: A
QUESTION 297
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
The organization contains the servers configured as shown in the following table.
The Mailbox servers are members of a database availability group (DAG) named DAG1.
You need to configure DAG1 to use a static DAG IP 192.168.1.100
Which Windows PowerShell cmdlet should you run?
A. Set-MailboxDatabaseCopy
B. Set-PublicFolderDatabase
C. Set-ClientAccessServer
D. Add-MailboxDatabaseCopy
E. Set-ClientAccessArray
F. Set-MailboxDatabase
G. New-PublicFolderDatabase
H. Set-DatabaseAvailabilityGroup
I. Add-RoleGroupMember
J. New-DatabaseAvailabilityGroup
K. Set-MailboxServer
L. Add-DatabaseAvailabilityGroupServer
M. New-MailboxDatabase
Answer: H
Explanation:
Set-DatabaseAvailabilityGroup-Identity DAG1-DatabaseAvailabilityGroupIpAddresses 192.168.1.100
http://technet.microsoft.com/en-us/library/dd297934.aspx
QUESTION 298
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
The organization contains the servers configured as shown in the following table.
The Mailbox servers are members of a database availability group (DAG) named DAG1.
The organization also has a load balancing solution for Client Access.
The load balancing solution has a virtual IP address that is available by using the mail.contoso.com host name.
You discover that Microsoft Outlook clients cannot receive Autodiscover information when one of the Client Access servers fails.
You need to ensure that all of the Outlook clients can connect to the Autodiscover services if a single Client Access server fails.
Which Windows PowerShell cmdlet should you run?
A. Add-MailboxDatabaseCopy
B. New-PublicFolderDatabase
C. Set-MailboxDatabaseCopy
D. Add-DatabaseAvailabilityGroupServer
E. Set-PublicFolderDatabase
F. Add-RoleGroupMember
G. Set-ClientAccessArray
H. Set-MailboxServer
I. Set-ClientAccessServer
J. New-MailboxDatabase
K. Set-MailboxDatabase
L. Set-DatabaseAvailabilityGroup
M. New-DatabaseAvailabilityGroup
Answer: G
QUESTION 299
Hotspot Question
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
You need to ensure that only a user named User1 can approve meeting requests sent to a resource mailbox named Meeting Room 1.
Which property tab should you modify? To answer, select the appropriate tab in the answer area.
Answer:
Select the “Resource Policy” tab.
QUESTION 300
You have an Exchange Server 2010 Service Pack 1 (SP1) organization.
The organization contains the servers configured as shown in the following table.
The Mailbox servers are members of a database availability group (DAG) named DAG1.
The organization contains a single public folder database named PF1.
You need to configure public folder replication for all of the public folders in PF1.
Which PowerShell cmdlet should you run before you configure public folder replication?
A. Set-MailboxServer
B. Add-DatabaseAvailabilityGroupServer
C. Set-MailboxDatabaseCopy
D. Set-PublicFolderDatabase
E. New-PublicFolderDatabase
F. Set-MailboxDatabase
G. New-MailboxDatabase
H. Set-ClientAccessArray
I. Add-RoleGroupMember
J. Set-DatabaseAvailabilityGroup
K. Add-MailboxDatabaseCopy
L. New-DatabaseAvailabilityGroup
M. Set-ClientAccessServer
Answer: D
New Updated Braindump2go 70-662 Dumps Add Many New 70-662 Exam Questions,You can Download Free 70-662 PDF and 70-662 VCE from Braindump2go.
Use Braindump2go 70-662 Study Guide and 70-662 Braindump2go to 100% Get 70-662 Certification.
FREE DOWNLOAD: NEW UPDATED 70-662 PDF Dumps &70-662 VCE Dumps from Braindump2go: http://www.braindump2go.com/70-662.html 507 Q&As)