[2016.Aug.Latest]Instant Download Braindump2go 300-207 Dump VCE 251q[NQ81-NQ90]

!!!2016/07 Cisco Official News!!!
CCNP Security 300-207 SITCS:Implementing Cisco Threat Control Solutions Exam Questions Updated Today!

Instant Free Download 300-207 SITCS PDF & 300-207 SITCS VCE Dumps from Braindump2go.com!
100% Pass Guaranteed!
100% Real Exam Questions!

NEW QUESTION 81 – NEW QUESTION 90:

1.|2016/08 Latest 300-207 SITCS PDF & 300-207 SITCS VCE 251Q&As:http://www.braindump2go.com/300-207.html
2.|2016/08 Latest 300-207 SITCS Exam Questions PDF:https://drive.google.com/folderview?id=0B272WrTALRHcbTlPUnl0Q1JTTjQ&usp=sharing

QUESTION 81
An ASA with an IPS module must be configured to drop traffic matching IPS signatures and block all traffic if the module fails. Which describes the correct configuration?

A.    Inline Mode, Permit Traffic
B.    Inline Mode, Close Traffic
C.    Promiscuous Mode, Permit Traffic
D.    Promiscuous Mode, Close Traffic

Answer: B

QUESTION 82
A new Cisco IPS device has been placed on the network without prior analysis. Which CLI command shows the most fired signature?

A.    Show statistics virtual-sensor
B.    Show event alert
C.    Show alert
D.    Show version

Answer: A

QUESTION 83
Which three options are characteristics of router-based IPS? (Choose three.)

A.    It is used for large networks.
B.    It is used for small networks.
C.    It supports virtual sensors.
D.    It supports multiple VRFs.
E.    It uses configurable anomaly detection.
F.    Signature definition files have been deprecated.

Answer: BDF

QUESTION 84
What are three best practices for a Cisco Intrusion Prevention System? (Choose three.)

A.    Checking for new signatures every 4 hours
B.    Checking for new signatures on a staggered schedule
C.    Automatically updating signature packs
D.    Manually updating signature packs
E.    Group tuning of signatures
F.    Single tuning of signatures

Answer: BCE

QUESTION 85
Which three statements concerning keystroke logger detection are correct? (Choose three.)

A.    requires administrative privileges in order to run
B.    runs on Windows and MAC OS X systems
C.    detects loggers that run as a process or kernel module
D.    detects both hardware- and software-based keystroke loggers
E.    allows the administrator to define “safe” keystroke logger applications

Answer: ACE

QUESTION 86
Which three webtype ACL statements are correct? (Choose three.)

A.    are assigned per-Connection Profile
B.    are assigned per-user or per-Group Policy
C.    can be defined in the Cisco AnyConnect Profile Editor
D.    supports URL pattern matching
E.    supports implicit deny all at the end of the ACL
F.    supports standard and extended webtype ACLs

Answer: BDE

QUESTION 87
Which four advanced endpoint assessment statements are correct? (Choose four.)

A.    examines the remote computer for personnel firewalls applications
B.    examines the remote computer for antivirus applications
C.    examines the remote computer for antispyware applications
D.    examines the remote computer for malware applications
E.    does not perform any remediation but provides input that can be evaluated by DAP records
F.    performs active remediation by applying rules, activating modules, and providing updates where
applicable

Answer: ABCF

QUESTION 88
Which statement regarding hashing is correct?

A.    MD5 produces a 64-bit message digest
B.    SHA-1 produces a 160-bit message digest
C.    MD5 takes more CPU cycles to compute than SHA-1.
D.    Changing 1 bit of the input to SHA-1 can change up to 5 bits in the output.

Answer: B

QUESTION 89
What is the access-list command on a Cisco IPS appliance used for?

A.    to permanently filter traffic coming to the Cisco IPS appliance via the sensing port
B.    to filter for traffic when the Cisco IPS appliance is in the inline mode
C.    to restrict management access to the sensor
D.    to create a filter that can be applied on the interface that is under attack

Answer: C

QUESTION 90
How does a user access a Cisco Web Security Appliance for initial setup?

A.    Connect the console cable and use the terminal at 9600 baud to run the setup wizard.
B.    Connect the console cable and use the terminal at 115200 baud to run the setup wizard.
C.    Open the web browser at 192.168.42.42:8443 for the setup wizard over https.
D.    Open the web browser at 192.168.42.42:443 for the setup wizard over https.

Answer: C


!!!RECOMMEND!!!

Braindump2go 2016/08 New Cisco 300-207 Exam VCE and PDF 251Q&As Dumps Download:
http://www.braindump2go.com/300-207.html [100% 300-207 Exam Pass Promised!]

 

2016/08 Cisco 300-207 New Questions and Answers PDF:
https://drive.google.com/folderview?id=0B272WrTALRHcbTlPUnl0Q1JTTjQ&usp=sharing